"Computer on Module" Product Guide

This page lists companies with one or more products emphasizing the keywords *Computer on Module*. Click on any vendor to see a listing of related products. To see all products, click expand all.

Sort by: relevance | company
  • AcQ InduCom  (2)
    • M383 DSP M-module
      Provides a powerful platform for high-speed analog signal (re) generation and digital signal processing (+)

      Features:

      • Three analog output channels share the 10 MSps output update rate
      • Local software allows enhanced and user-specific signal processing
      • Eight general-purpose digital I/Os (4x input, 4x output, TTL-compatible) are available [...]
    • M381 DSP M-module
      Provides a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • Two analog input channels are capable of simultaneously sampling at (maximum) 7.5 MSps sampling rate
      • Local software allows enhanced and user-specific signal processing
      • Gain and offset errors are compensated by the DSP
  • Acromag, Inc.  (1)
    • VPX Carrier Cards
      Acromag's VPX4810 3U VPX carrier cards provide a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system (+)

      Features:

      47677.jpg
      • These carrier cards route power and interface bus signals to a plug-in mezzanine module through the VPX card slot connector
      • An 8-lane PCIe bus Gen 2 interface enables rapid data throughput
      • By inserting PMC/XMC industrial I/O and configurable FPGA modules from Acromag or other vendors on the carrier
  • ACTIS Computer  (2)
    • XBOX-9347
      Highly integrated computer box solution, measuring 165 mm x 160 mm x 52 mm (6.5” x 6.2” x 2”), based on the PICMG COM Express processor module standard (+)

      Features:

      38202.jpg
      • Computer Box concept based on COM Express
      • PowerPC processor MPC8347E
      • Up to 2 GB DDR2
    • XCOM 9347
      COM Express module based on PowerPC architecture (+)

      Features:

      • Fast, very small, low power
      • PowerQUICC II Pro MPC8347E 400 MHz
      • 32-bit, 33/66 MHz PCI
  • ADL Embedded Solutions Inc.  (2)
    • MSM586SL
      PC/104 module (+)

      Features:

      • 4xCOMs
      • DOC200 socket
      • Programmable watchdog
    • SM915
      A tiny computer module based on the i915GM chipset with 400/533 MHz front side bus (+)

      Features:

      • An upgrade to the SM855 module, the SM915 supports a wide range of processors from Celeron M600 up to 2.2GHz Pentium M760 with equivalent Pentium 4 performance from 600 MHz up to 4.4 GHz
      • 115 mm x 70 mm
      • Provides all standard PC interfaces such as VGA, COM1/2, LPT1, a floppy interface, an IrDA interface, two PS/2 ports for mouse and keyboard, and eight USB V2.0 ports
  • Advantech Corporation  (1)
    • SOM-5788
      i7 Computer-on-Module (+)

      Features:

      • A Computer-on-Module
      • Embedded Intel Core i7 processor + QM57
      • Intel GMA integrated in Intel Core i7 or Intel Core i5
  • AEWIN Technologies Co., Ltd.  (5)
    • CM-7301
      Intel Core 2 Duo COM Express module with CRT/LVDS, LAN, and audio (+)

      Features:

      33413.jpg
      • PICMG COM Express R1.0 compliant
      • One DDRII SODIMM socket
      • Intel 82573L GbE interface
    • CM-7300
      Intel Pentium M/Celeron M COM Express module with CRT/LVDS, LAN, and audio (+)

      Features:

      33412.jpg
      • PICMG COM Express R1.0 compliant
      • One DDRII SODIMM socket
      • Intel 82573L GbE interface
    • BB-103
      COM Express ATX Evaluation Base Board with Digital Signage Features (for CM-7301 and CM-7300) (+)

      Features:

      33414.jpg
      • PICMG COM Express R1.0 compliant
      • Suports COM Express basic form factor (95 mm x 125 mm), pin-out type II
      • One PCI Express x 16, four PCI Express x 1, one PCI
    • CM-7305
      Intel® Atom™ Z5xx serial Processor COM Express Module with 2 PCI-E, 6 USB, GbE, LVDS, SDVO, IDE, PCI, 2 SATA (+)

      Features:

      42528.jpg
      • Ultra low power consumption
      • Embedded Intel® Atom processor Z5xx series
      • Intel® system controller Hub US15W
    • CM-7310
      Intel Pentium M/ Celeron M COM Express Module with CRT/24-bit LVDS, LAN & Audio (+)

      Features:

      42526.jpg
      • Intel Pentium® M / Celeron M processors
      • Intel 915GME with ICH6M chipset
      • PICMG COM Express R1.0 compliant
  • Anders Electronics  (1)
    • CM-X270L
      Wireless LAN solution available in the Computer-On-Module market (+)

      Features:

      32118.jpg
      • Integrated Wi-Fi 802.11b WLAN interface, allowing developers to implement wireless connectivity for the first time in embedded and mobile computing applications
      • Single or dual antenna options are supported, and the device is capable of operating at close ranges with no antenna active
      • Onboard SDRAM
  • Avnet Electronics Marketing  (2)
    • AMD Socket S1
      PDSI's AMD Socket S1 COM Express Module (COMX-S1) is a low-cost, compact, embeddable computing core with the capability to drive a broad range of OEM applications (+)

      Features:

      44294.jpg
      • Built around AMD's x86-based Socket S1 processors, it enables 64-bit computing at a progression of performance levels from the ultra low-power AMD Sempron 2100+ (perfect for fanless applications) to the dual-core muscle of the AMD Turion X2 TL62
      • The Computer-on-Module design is fully compliant with PICMG COM Express Type 2 specifications, offering a large variety of interfaces to cover the needs of most embedded applications
      • The AMD M690/SB600 chipset provides I/O versatility, with interfaces for high-speed data, audio, high-resolution graphics, and more
    • COMX-S1 COM Express Module
      AMD Socket S1 COM Express Module (COMX-S1) is a low cost, compact, embeddable computing core (+)

      Features:

      35178.jpg
      • Ideal for OEM applications especially where video output is required
      • Several performance levels are available, from the ultra low-watt AMD Sempron processors (great for fanless applications) to the dual-core muscle of AMD Turion X2 Mobile Technology
      • The AMD M690 series chipset delivers exceptional built-in graphics
  • Ballard Technology  (1)
    • Colibri T20
      Colibri T20 is a SODIMM sized embedded ARM computer module based on the NVIDIA® Tegraâ 2 system-on-chip. The dual core ARM Cortex-A9 CPU clocks at up to 1.0 GHz and features an integrated ULP GeForce® GPU. With its very small form factor the Colibri T20 module delivers outstanding CPU and graphic performance at very low power consumption! (+)

      Features:

      182011521751465818.jpg
      • .
      • .
      • .
  • Boardcon Embedded Design  (2)
    • MINI6410-II Computer-on-Module
      Boardcon's product line comprising computer-on-module based on ARM processor architectures (+)

      Features:

      46007.jpg
      • Each module covers distinct range of price, performance and features, to create a line
      • All-in-one single board computers with CPU, memory and peripherals
      • Based on ARM processor architectures
    • MINI2440 Computer-on-Module
      The MINI2240 is an ARM-9 based, small form factor, OEMable module populated with the S3C2440A (+)

      Features:

      46353.jpg
      • Nand Flash can be updated into 1GB
      • SDRAM can be updated into 128MB immediately according to the customer's requirement
      • Samsung ARM9 S3C2440A ARM920T MCU, up to 400MHz
  • Boardcon Technology Limited  (1)
    • ARM development board based on the Samsung Exynos 4412
      Boardcon Embedded Design, an Original Design Manufacturer dedicated to providing high quality ARM core based industrial Computer-on-Module, Single Board Computer and Evaluation board announces the launch of its latest embedded development board based on the highly scalable Samsung Exynos 4412 Quad core ARM Cortex-A9 1.4GHz processor. This development board will be available as a standard product to OEMs and serve as a launch pad for Boardcon’s customized ODM design services targeting mid-sized and large OEMs requiring a feature specific product based on the ARM Cortex-A9 core. The development board KIT4412-II provides OEMs with excellent off the shelf solution ready for integration into their own products and systems. Additionally, for qualifying ODM customers, KIT4412-II provides an ideal platform to test performance and scalability prior to engaging in Boardcon’s quick-turn custom designs services for a feature specific product design. The board runs Android 4.0.4 Ice Cream Sandwich and comes with the standard apps like the Phons, Clock, Calculator, etc. This product is composed of the carrier board and Computer-on-Module. The rich feature set of the KIT4412-II is customizable according to the price / performance requirements of the target application. Feature * CPU: Samsung Exynos 4412 Quad ARM Cortex-A9 1.4GHz with 1024KB L2 cache * Advanced power management * RAM: 2G Bytes DDR3 * Flash: 8GB iNAND * 10.1" capacitive touchscreen * 1 USB OTG, 4 USB Host * 2 RS485, 4 RS232, 4 UART TTL * HDMI V1.4, 1080p@30fps HD output * 10/100Mbps Ethernet, RJ45 interface * I2C, SPI / I2S, INT / GPIO, VGA, Audio I/O * 2 camera connector, HM2055 2Mega pixels * USB WIFI Module, Realtek RTL8188CUS * PCIE 3G * support SIM card, SD card, TF card * Google Android4.0.4 ICS * Optional module: WIFI, Camera, 3G, Bluetooth FEATURES: * CPU: Samsung Exynos 4412 Quad ARM Cortex-A9 1.4GHz with 1024KB L2 cache * Advanced power management * RAM: 2G Bytes DDR3 * Flash: 8GB iNAND * 1 USB OTG, 4 USB Host * 2 RS485, 4 RS232, 4 UART TTL * HDMI, VGA, Audio I/O * 2 camera connector * Google Android4.0.4 ICS * Optional module: WIFI, Camera, 3G [...] (+)

      Features:

  • Connect Tech, Inc. (CTI)  (1)
    • Qseven Boards
      Qseven is an off-the-shelf, multi-vendor, Computer-on-Module that integrates the core components of a common PC (+)

      Features:

      52147.jpg
      • Incorporating Qseven modules into the Connect Tech carrier boards provides instant access to current embedded processors that are easily upgradable to accommodate future generations
      • Single or dual Mini-PCIe and SIM-card expansion
      • 2x SATA
  • DIGITAL-LOGIC AG  (2)
    • MSM586SL
      PC/104 module (+)

      Features:

      • 4xCOMs
      • DOC200 socket
      • Programmable watchdog
    • SM915
      A tiny computer module based on the i915GM chipset with 400/533 MHz front side bus (+)

      Features:

      • An upgrade to the SM855 module, the SM915 supports a wide range of processors from Celeron M600 up to 2.2GHz Pentium M760 with equivalent Pentium 4 performance from 600 MHz up to 4.4 GHz
      • 115 mm x 70 mm
      • Provides all standard PC interfaces such as VGA, COM1/2, LPT1, a floppy interface, an IrDA interface, two PS/2 ports for mouse and keyboard, and eight USB V2.0 ports
  • Dynatem, Inc.  (1)
    • PM854
      A small Computer-on-Module (COM) that makes all the features of the Freescale PowerQUICC MPC8540 available for custom design (+)

      Features:

      20606.jpg
      • Complete, autonomous industrial computer that makes all MPC8540 I/O signals available; all signals are routed to high-density connectors on the carrier board
      • MPC8540 with Embedded e500 Book E compatible core at up to 1 GHz
      • Up to 512 MB of DDR SDRAM with ECC support
  • e-con Systems  (1)
    • eSOM300 –PXA300 COM
      eSOM300 is e-con's NEW computer on module based on XScale PXA300 ultra low power microprocessor, DDR SDRAM and NAND flash is a low power cost effective ARM Computer on module (+)

      Features:

      46414.jpg
      • Higher processing speeds with Marvell (formerly Intel)
      • XScale PXA300 at 208/624 MHz
      • 64/128/256 MB Mobile DDR SDRAM - ultra low power memory
  • Ecrin Automatismes  (1)
    • ONYX SFF Rugged System
      Based on COM Express Core i7 2nd and 3rd Gen, it offers, on MXC rugged mezzanine option, an incredible Graphic and Computing GPGPU AMD Radeon E6760 performance with long life management. No NRE, cable-free, very flexible, this new Entry Range conduction cooled RCU operates between -40°C and +70°C and is pre-qualified MIL-STD-810, DO-160, MIL-STD-461 and MIL-STD-1275. (+)

      Features:

      • E6760 Discrete GPU option
      • qualified MIL-STD-810, DO-160 compliant
      • -40°C / +70°C operating environment
  • EUROTECH  (1)
    • CPU-1220
      A PC/104-based 133 MHz 486DX computer module (+)

      Features:

      • 32 Mbytes of DRAM
      • SVGA
      • BIOS located in FlashEPROM and is reprogrammable onboard
  • Evalue Technology  (1)
    • ESM-2850
      An ROHS-compliant ETXexpress Computer-On-Module (+)

      Features:

      • Conforms to PICMG COM Express standard
      • Supports 90 nm Intel µFC-PGA 478 / µFC-BGA 479 Pentium M / Celeron M CPU Intel 82915GM chipset
      • One SODIMM up to 1 GB DDR2 SDRAM
  • Fastwel Group Co. Ltd  (1)
    • CPB906 COM Module
      Fastwel CPB906 is a Computer Module designed for use as a computing core in application specific embedded systems. Fastwel CPB906 is based on x86 code compatible CPU — Vortex86DX running at 600 MHz and addressing 256 MB DDR2 SDRAM. CPB906 has just a 65 × 40 mm footprint (57% of credit card size). It is so far the smallest x86 Computer-on-Module, which is a perfect choice for space constrained applications. (+)

      Features:

      284812234861762524.jpg
      • Vortex86DX processor 600 MHz
      • 256 MB DDR2 SDRAM
      • 10/100 Mbit/s Fast Ethernet
  • Gumstix  (3)
    • Overo EVM pack
      Gumstix's Overo EVM pack delivers the full range of Overo computer-on-module functions and accessories that are critical to smart device development and prototyping (+)

      Features:

      • High-performance OMAP3530-based Gumstix Overo Fire Computer-On-Module (COM)
      • Bluetooth and 802.11(b/g) wireless communications, 10/100BASE-T Ethernet
      • High-speed USB Host and USB OTG
    • Tobi-Duo board
      A dual Ethernet version of Gumstix's Tobi expansion board for its tiny Overo computer-on-module (COM) series for creating very small, effective routers or security-based appliances (+)

      Features:

      43909.jpg
      • The Tobi-Duo expansion board features two 10/100BASE-T Ethernet connectors and support for any Gumstix Overo computer-on-module
      • A connected 5v wall adapter powers both the Tobi-Duo and the attached Overo COM
      • Schematics and physical dimension information for the Tobi-Duo can be downloaded from pubs.gumstix.com
    • Overo Wireless pack
      Design engineers use this tiny computer-on-module pack to develop a lower cost, enhanced function wireless product such as a smart handheld device, power management meter or robot (+)

      Features:

      • OMAP3530 processor on a Gumstix Overo Fire COM
      • Bluetooth and 802.11(b/g) wireless communications
      • High-speed USB Host & OTG
  • Innovative Integration  (3)
    • VPXI-ePC
      The VPXI-ePC is a 3U VPX embedded computer system that provides a performance architecture for instrumentation, signal processing and embedded computing applications (+)

      Features:

      52899.jpg
      • 3U OpenVPX embedded computer system
      • Integrated timing and triggering
      • Advanced multiple plane connectivity
    • VPXI-ePC
      3U, 1/2 Rack OpenVPX Windows/Linux/VxWorks Computer with i7 Processor and Five Expansion Slots (+)

      Features:

      • The VPX-COMEX singleboard computer combines an Intel i7 quad-core COM Express CPU module plus precision timing,
      • Multiple, high-performance data planes employing both centralized and mesh topologies interconnect the CPU and all slots, supporting data-movement intensive applications in real-time. [...]
    • X6-250M PMC/XMC Module with 8 250PSPS
      The X6-250M integrates digitizing with signal processing on a PMC/XMC IO module. The module has a powerful Xilinx Virtex 6 FPGA signal processing core, and high performance PCI Express/PCI host interface. Applications include software-defined radio, RADAR receivers, and multi-channel data recorders. (+)

      Features:

      214503304641304979.jpg
      • Eight 250 MSPS, 14-bit A/D channels
      • +/-1V, AC-Coupled, 50 ohm, SSMC inputs
      • Xilinx Virtex6 SX315T/SX475T or LX240T
  • Kontron  (15)
    • ETXexpress-690 COM
      COM Express module graphics engine built around high-end embedded chipset (+)

      Features:

      • Based on the latest AMD M690E and SB600 embedded chipset with the integrated Radeon X1200 graphics core and has been tested for DirectX 9, OpenGL as well as hardware accelerated MPEG and WMV9 decoding capabilities using the newest range of benchmarking tools
      • Up to 256 MB of graphics memory, anti-aliasing, and 3D texture
      • Designed for graphic-intensive applications requiring a well-balanced Computer-on-Module that combines comprehensive high-performance 2D and 3D graphics with adequate processing performance
    • nanoETXexpress
      The Kontron nanoETXexpress computer-on-module occupies a footprint that is a mere 55 mm x 84 mm (+)

      Features:

      • Follows the COM Express standard as defined by the PCI Industrial Computer Manufacturer's Group
      • 100 percent compliant with Type 1 pin-out
      • Multiple PCI Express lanes and USB 2.0 ports
    • Kontron ETXexpress
      Computer-on-Module (+)

      Features:

      35717.jpg
      • 100 percent COM Express compliant
      • Processing performance up to 2 GHz Intel Core 2 Duo processors
      • Low power VIA and AMD based options also available
    • ETX-PM3
      SATA hard drive access and extended sleep state modes with the Intel Pentium M and Celeron M processors to round off the highly scalable 3.0 generation of ETX computer-on-modules (+)

      Features:

      • Performance for the computer-on-module is provided by the low power Intel Celeron M processors from 600 MHz to 1.0 GHz and Pentium M processors from 1.4 GHz to 1.8 GHz
      • New power saving feature: The ‘suspend to RAM' functions ensure that power is supplied only to the RAM when all other system components are idle
      • This not only increases battery life, but also provides more convenient operation, enabling field personnel to awaken sleeping applications
    • Kontron ETX COMs
      The Kontron ETX-CD is the highest performance Computer-On-Module based on the ETX 3.0 standard. The ETX-CD module is built around the Intel Core 2 Duo processor and Intel® Celeron M processor as well as the Intel 945GM and ICH7M chipset. Kontron ETX-CD modules provide the following interfaces that are always located in the same physical position on each board: PCI 2.3, USB 2.0, Serial ATA, Parallel ATA, LVDS as well as an ACPI (Advanced Configuration and Power Interface) for optimized power management. This consistency of design ensures scalability between ETX product family modules. Other modules offering AMD and VIA processors also are available (+)

      Features:

      35719.jpg
      • Highest performance for Computer-On-Modules
      • Up to Intel Core2 Duo processors
      • Support for up to 2GB of system memory
    • ETX 3.0 Baseboards
      ETX modules measure 95 mm x 125 mm, and provide Computer-On-Module (COM) capability for industrial boards supporting the standard (+)

      Features:

      31515.jpg
      • In the latest version of the specification, ETX 3.0 adds support for 2x Serial ATA without changing the existing connector
      • More information on ETX is available at www.etx-ig.org
      • The Kontron ETX miniBaseboard provides ETX 3.0 module support in a small 130 mm x 155 mm footprint, targeting deeply embedded applications
    • ETXexpress-PM
      A Computer-On-Module based on the Intel Pentium M processor 760 (2.13 GHz) and the Mobile Intel 915 GM Express chipset (+)

      Features:

      • Delivers GbE for fast communication capabilities in addition to the advanced graphics of the Intel Graphics Media Accelerator 900
      • PCI Express graphics supported [...]
    • ETX-PM
      A ETX form factor Computer-on-Module (COM) (+)

      Features:

      • Intel Pentium M processor at 1.6 GHz
      • 1 Gbyte of DDR SDRAM (with ECC support)
      • Four USB 2.0 ports
    • ETX-CD
      High-performance Computer-On-Module based on the ETX 3.0 standard (+)

      Features:

      33664.jpg
      • The new ETX-CD module is built around the Intel Core 2 Duo processor and Intel Celeron M processor as well as the Intel 945GM and ICH7M chipset
      • Provide the following interfaces that are always located in the same physical position on each board: PCI 2.3, USB 2.0, Serial ATA, Parallel ATA, LVDS as well as an ACPI (Advanced Configuration and Power Interface) for optimized power management
      • This consistency of design ensures scalability between ETX product family modules
    • X-board<863>
      A small form factor embedded Computer-On-Module (+)

      Features:

      • Based on the SIS 550 LV processor (up to 400 MHz) with an integrated chip set
      • Designed for low power consumption
      • Does not require any active cooling device
    • E2Brain EB8540
      Computer-On-Module (+)

      Features:

      • Freescale PowerPC MPC8540 @ 660/800 MHz MPC8541 optional PCI 32 bit, 33 MHz
      • Up to 256 MB DDR-SDRAM
      • 32 MB Flash
    • EB8347
      A RISC-based Computer-On-Module (COM) in the E Brain COM family (+)

      Features:

      • Freescale MPC8347 processor at 533 MHz/256 MB DDR SDRAM (soldered)/64 MB flash/integral security engine
      • Two GbE ports, four serial ports, AC97 audio interface, two USB 2.0 ports
      • Graphics support: SM501 graphics chip with DVI-I + TTL flat-panel interface
    • nanoETXexpress-SP
      Credit card size COM Express compatible module - based on Intel Atom processor Z500 series (+)

      Features:

      37634.jpg
      • Up to Intel Atom 1,6 GHz, Intel System Controller Hub US15W
      • Onboard up to 1 GB Memory and up to 4 GB Flash Drive
      • Serial ATA, PCI Express, Ethernet, USB 2.0
    • ETXexpress-WPM
      Highest bandwidth on a COM Express solution built around Intel Pentium and Celeron processors (+)

      Features:

      37632.jpg
      • Intel Pentium M (up to 2.0 GHz) and Celeron processors with the Intel 3100 chipset
      • Up to 12 PCI Express Lanes
      • 3 x Ethernet on board (2 x GbE, 1x 10/100)
    • microETXexpress-SP
      Based on the Intel Atom processor with full COM Express Pinout Type 2 compatibility including SDVO graphics (+)

      Features:

      37633.jpg
      • Intel Atom Z500 series processor up to 1.6 GHz
      • Intel System Controller Hub US15W
      • Supports up to 1 GByte DDR2 400/533 system memory
  • Lippert Embedded Computers  (1)
    • CoreExpress-ECO
      Advanced Computer-On-Module (COM) implementation in a 58 mm x 65 mm format (+)

      Features:

      • Intel Atom processor with low TDP
      • Legacy-free – analog signals can be implemented on the carrier board
      • 512 MB or 1 GB SDDR2 soldered RAM
  • LiPPERT Embedded Computers  (2)
    • CoreExpress-ECO Computer-On-Module
      The CoreExpress-ECO is a tiny Computer-on-Module (COM) in a 58 mm x 65 mm format (+)

      Features:

      45795.jpg
      • Based on SFF-SIG's CoreExpress specification, CoreExpress modules are legacy-free, meaning they come with digital interfaces only
      • Applications requiring analog signals can implement these on the carrier board
      • The module's low power requirements minimize cooling needs, decreasing the total dimensions of the solution further
    • Cool LiteRunner-ECO PC/104 CPU
      The PC/104 Cool LiteRunner-ECO is designed to be a carrier board for a CoreExpress advanced computer on module (COM) (+)

      Features:

      45794.jpg
      • The board specifically supports LiPPERT's ultra small “CoreExpress-ECO.”
      • Intel's Atom processor family Z5xx and US15W chipset power this first and well-established CoreExpress-ECO module
      • With 1.1 GHz to 1.6 GHz and various memory configurations, the module stays in a TDP range of 5 W max
  • MEN Micro Elektronik GmbH  (4)
    • XM1L
      Intel Atom XL-based ESMexpress COM Module Features (+)

      Features:

      44543.jpg
      • Extended Temperature Operation
      • An increased memory capacity of 2 GBs, double its predecessor
      • Upgraded ESMexpress Computer-on-Module (COM) that incorporates the Intel Atom XL processor to provide tested, qualified operation in the extended temperature range of -40 °C to +85 °C (-40° F to +185 °F) in both conduction and convection cooled environments
    • MM2 ESMini COM
      MM2-an ultra-small computer-on-module (COM) that features an application-specific carrier board and upgraded processor, is an expansion of the ESMini series. (+)

      Features:

      215890244801919575.jpg
      • Ideal for rugged environments with high graphics requirements in small spaces.
      • ultra-small computer-on-module (COM) that features an application-specific carrier board and upgraded processor
      • ideal for industrial, harsh, mobile and mission-critical environments with high graphics requirements in small spaces
    • MM50
      MM50 incorporates the high processing capabilities and exceptional power dissipation of PowerPC into a flexible, compact COM (computer-on module) board (+)

      Features:

      45429.jpg
      • MM50 ESMini module uses a PowerPC MPC5121e or a MPC5123 processor
      • 760 MIPS
      • Memory Managment Unit
    • XM51
      A PowerPC-based rugged computer-on-module (COM) that offers speeds up to 1.5 GHz via multi-core processing. Equipped with a Freescale QorIQ processor, the new XM51 is an extension on MEN Micro’s family of ruggedized COMs based on the space-saving ESMexpress standard, currently in preparation with ANSI/VITA as RSE 59. (+)

      Features:

      192034447711755069.jpg
      • Speeds up to 1.5 GHz via multi-core processing
      • Equipped with a Freescale QorIQ processor
      • Extension on MEN Micro’s family of ruggedized COMs
  • Mercury Computer Systems, Inc.  (7)
    • Ensemble GSC6200
      The EnsembleTM 6000 series 6U OpenVPXTM GSC6200 GPU Processing Module from Mercury Computer Systems, Inc. harnesses the tre- mendous compute power of graphics processing units (GPUs) for rugged, high-performance, embedded signal and image processing in a broad range of defense and commercial applications, including radar signal processing, electro-optical and infrared image processing, electronic warfare and other applications requiring intense computational capabilities on large streams of data (+)

      Features:

      52886.jpg
      • Dual MXM sites support 1 NVIDIA GeForce GTX 460M Fermi Architecture GPU, each with two single-link DVI interfaces
      • 48-lane, 12-port PCI Express Gen2 switch to backplane
      • Software-controlled management features
    • OpenSAL
      An open source version of Mercury Computer Systems' Scientific Algorithm Library (SAL) for vector math acceleration (+)

      Features:

      • SAL is a high-throughput, low-latency signal processing library containing efficient algorithms with the fewest possible instructions and computing resources
      • OpenSAL provides a robust API, C code reference design and documentation for over 400 SAL math functions
      • Simplifies programming of heterogeneous processing environments such as FPGAs and DSPs
    • PowerPC 7410 6U/9U Systems
      Embedded computing reaches a new level of performance with the RACE++ Series PowerPC 7410 daughtercards from Mercury Computer Systems (+)

      Features:

      • Each PowerPC 7410 daughtercard contains two MPC7410 microprocessors with AltiVec technology
      • These unique microprocessors combine a modern superscalar RISC architecture with an AltiVec parallel vector execution unit
      • The AltiVec vector processing unit revolutionizes the performance of computationally intensive applications such as image and signal processing
    • OpenVPX ISR subsystem
      Crafted to execute Processing, Exploitation, and Dissemination (PED) within the ISR realm (+)

      Features:

      45292.jpg
      • “High-end” image- and signal-processing subsystem that deployed warfighters need to heighten their own situational awareness and provide the parallel data stream computing capabilities paramount to mission success
      • Mercury's Ensemble 6000 Series GSC6200 OpenVPX-based GPU processing module
      • OpenVPX form factor makes the subsystem wide open for compatibility in cutting-edge rugged defense systems
    • Echotek Series RF 1800GT
      An ultra high-performance wideband microwave receiver (+)

      Features:

      • Features a direct digital synthesizer, which uncouples tuning speed from phase noise
      • Highly suitable for signals intelligence and electronic warfare systems
      • Comprises two single-slot VME modules: the 1800RF radio frequency module and the 1800S synthesizer module; together, these modules form a microwave downconverter tunable over the entire 0.5 GHz to 18 GHz range, providing both narrowband and wideband outputs
    • PowerStream 3000
      For SIGINT/COMINT deployments using standard 3U CompactPCI (+)

      Features:

      • Conduction-cooled and ruggedized
      • Sophisticated power management
      • Easy application migration using VxWorks
    • PowerStream 6100 VXS Starter Kit
      A fully integrated multicomputer packaged with a complete set of software development tools, ready out-of-the-box for application development (+)

      Features:

      30679.jpg
      • Integrated set of VXS hardware modules for processing, I/O, and RapidIO switch fabric communications
      • Serial RapidIO VXS (VITA 41.2) chassis
      • Software development tools for creating and debugging real-time multiprocessor applications, including algorithm and data movement APIs
  • MSC Vertriebs GmbH  (1)
    • MSC NANORISC-AM335X
      nanoRISC® is a module concept combining the latest low power RISC controllers and embedded interfaces on a small form factor COM (Computer On Module). Ideally suited for embedded applications, a variety of easy-to-use interfaces are available. The nanoRISC® form factor has been created for applications requiring a small form factor and lowest power consumption. nanoRISC® modules will be plugged onto an application-specific baseboard. The design of the nanoRISC® AM335X module is based on the new Texas Instruments® Cortex™-A8 CPU offering a wide performance range, lowest power consumption and a high degree of functional integration for entry level embedded applications. The AM335X processor is combined with DDR3 SDRAM, SLC NAND Flash and a power management controller (PMIC). Optionally, the module can be used with 2x 10/100 LAN or even GbE LAN The module is available in commercial and extended temperature range. Support for Linux and Windows CE is available. FEATURES: Texas InstrumentsCortex™-A8 CPU AM335X clocked at 300 to 800MHz up to 512Mbyte DDR3 SDRAM soldered up to 512Mbyte SLC NAND Flash soldered 10/100 Base-T Ethernet Interface, optional second 10/100 LAN or GbE USB 2.0 HS Host, USB 2.0 HS OTG RGB 16/18/24 bit up to 1366 x 768 CAN 2.0B, 3x UART, 2x SPI, 2x I�C I�S Audio Interface SD V3.0 / SDIO V2.0 / MMC V4.3 Optional SGX530 Grahics Acceleration Optional Industrial (Realtime) Ethernet Commercial and extended commercial temperature range Support for Linux and Windows EC7 [...] (+)

      Features:

  • PCI Embedded Computer Systems  (1)
    • mini-XTX Carrier
      Small form factor carrier that is the same size as a XTX Computer-On-Module (+)

      Features:

      37689.jpg
      • Smallest form factor (95 x114 mm) of any high performance modular XTX CPU system on the market
      • Expandable by adding available adapters and standard I/O cards
      • Modular embedded computer solution without a backplane
  • PHYTEC America LLC  (1)
    • KPCM-037
      The phyCORE-i.MX31 Rapid Development Kit is a low cost development kit supported by Board Support Packages (BSP) for Windows Embedded CE 6.0 and Linux operating systems (+)

      Features:

      35219.jpg
      • PhyCORE-i.MX31 Single Board
      • Computer module
      • PhyCORE--i.MX31 carrier board (PCM-970)
  • RTD Embedded Technologies, Inc.  (1)
    • HiDANplus
      HiDANplus is an advanced, modular enclosure solution for PC/104-based computer modules. HiDANplus systems are watertight and include EMI gasketing to ensure minimal emissions. Frames are milled from a solid, impact-resistant aluminum alloy, and can be configured with standard PC connectors or military cylindrical connectors. A 120-pin stackable raceway increases module-to-module signal communication, and allows user configurable I/O connectors to be mounted on any frame in the system. Advanced thermal transport, MIL-SPEC paint, and shock-mount isolation options available. (+)

      Features:

      217089447941182046.jpg
      • Compatible with RTD’s complete product line of PCI Express, PCI, and ISA modules
      • Milled from solid T-6061 aluminum (milled heat sink fin options)
      • Modular Stack for easy upgrades and field serviceability
  • Technologic Systems  (4)
    • TS-SOCKET MACROCONTROLLERS
      TS-4710 Computer-on-Module The TS-4710 is a low profile, credit card sized TS-SOCKET Computer-on-Module which features a Marvell ARM9 PXA166 800MHz, or optionally a PXA168 1066MHz. The TS-4710 features a software programmable Lattice XP2 8K LUT FPGA which by default implements several of our controllers such as our high speed SD interface, XUARTs, and SPI controller, and more. With 2 SD card sockets this board is able to utilize our DoubleStore technology which makes the system extremely reliable. External devices can connect to the TS-4710 using Ethernet, USB host, I2C, SPI, UARTs, or GPIO. We also provide an external 16-bit bus that can be implemented over 21 DIO pins. TS-SOCKET Computer-on-Module Standard TS-SOCKET is an embedded computer standard that defines both a form factor and a connection pin-out and is based on two 100-pin low-profile connectors, allowing secure connection between a Computer-on-Module and a carrier board. TS-SOCKET Computer-on-Module feature CPU, RAM, NAND Flash, SD Card socket, Ethernet MAC/PHY and requires a single 5 V power source. Peripherals can include USB host and device, I2C, CAN, GPIO, external bus, video, touchscreen, audio, SPI, and UART. All parts are soldered-on and no moving parts are used, ensuring embedded ruggedness and reliability. TS-SOCKET Specs 75 mm x 55 mm (credit card sized) Dual 100-pin connectors Secure connection with mounting holes Common pin-out interface Low profile with 6 mm spacing A TS-SOCKET carrier board can be any piece of hardware, supplied by the customer or Technologic Systems, that interfaces with a Computer-on-Module through the dual TS-SOCKET standard connectors. JUMP-START YOUR EMBEDDED SYSTEM DESIGN The TS-SOCKET Computer-on-Modules securely connect to your custom carrier board, enabling drastically reduced design time and complexity. Start your embedded system design around one of our TS-SOCKET Computer-on-Modules to reduce your overall project risk and accelerate time-to-market. FEATURES: TS-4710 Features Up to 1066MHz CPU with 512MB RAM User-Programmable 8K LUT FPGA Boots Linux in less than a half second Robust DoubleStore Flash storage LCD video output to WUXGA USB2, Ethernet, PCIE, SPI, 6 UARTS Touch Panels available TS-SOCKET BENEFITS Simplifies custom embedded systems Rapid design process gets products to market faster Several COTS carrier boards for evaluation and development Design your own carrier board or use our design services Computer-on-Module are interchangeable for future upgrades Other TS-SOCKET CPUs TS-4200: Atmel ARM9 with super low power TS-4600: 450MHz at extremely low cost + 2 Ethernets TS-4712: like TS-4710 + 2 Ethernets TS-4800: FreeScale iMX515 with video and 800MHz CPU PRICE AND AVAILABILITY Computer-on-Modules are available now. Several COTS development carrier boards are also available. TS-TPC-8390 is available as a complete touch panel computer product using either TS-4700 or TS-4800 Computer-on-Module. Prices start at $99 at quantity 100. [...] (+)

      Features:

    • TS-4710 Computer-on-Module
      The TS-4710 is a low profile, credit card sized TS-SOCKET Computer-on-Module which features a Marvell ARM9 PXA166 800MHz, or optionally a PXA168 1066MHz. The TS-4710 features a software programmable Lattice XP2 8K LUT FPGA which by default implements several of our controllers such as our high speed SD interface, XUARTs, and SPI controller, and more. With 2 SD card sockets this board is able to utilize our DoubleStore technology which makes the system extremely reliable. External devices can connect to the TS-4710 using Ethernet, USB host, I2C, SPI, UARTs, or GPIO. We also provide an external 16-bit bus that can be implemented over 21 DIO pins. TS-SOCKET Computer-on-Module Standard TS-SOCKET is an embedded computer standard that defines both a form factor and a connection pin-out and is based on two 100-pin low-profile connectors, allowing secure connection between a Computer-on-Module and a carrier board. TS-SOCKET Computer-on-Module feature CPU, RAM, NAND Flash, SD Card socket, Ethernet MAC/PHY and requires a single 5 V power source. Peripherals can include USB host and device, I2C, CAN, GPIO, external bus, video, touchscreen, audio, SPI, and UART. All parts are soldered-on and no moving parts are used, ensuring embedded ruggedness and reliability. TS-SOCKET Specs 75 mm x 55 mm (credit card sized) Dual 100-pin connectors Secure connection with mounting holes Common pin-out interface Low profile with 6 mm spacing A TS-SOCKET carrier board can be any piece of hardware, supplied by the customer or Technologic Systems, that interfaces with a Computer-on-Module through the dual TS-SOCKET standard connectors. JUMP-START YOUR EMBEDDED SYSTEM DESIGN The TS-SOCKET Computer-on-Modules securely connect to your custom carrier board, enabling drastically reduced design time and complexity. Start your embedded system design around one of our TS-SOCKET Computer-on-Modules to reduce your overall project risk and accelerate time-to-market. FEATURES: TS-4710 Features Up to 1066MHz CPU with 512MB RAM User-Programmable 8K LUT FPGA Boots Linux in under a second Robust DoubleStore Flash storage LCD video output to WUXGA USB2, Ethernet, PCIE, SPI, 6 UARTS Touch Panels available TS-SOCKET BENEFITS Simplifies custom embedded systems Rapid design process gets products to market faster Several COTS carrier boards for evaluation and development Design your own carrier board or use our design services Computer-on-Module are interchangeable for future upgrades Other TS-SOCKET CPUs TS-4200: Atmel ARM9 with super low power TS-4600: 450MHz at extremely low cost + 2x Ethernet TS-4712: like TS-4710 + 2x Ethernet TS-4800: FreeScale iMX515 with video and 800MHz CPU PRICE AND AVAILABILITY Computer-on-Modules are available now. Several COTS development carrier boards are also available. TS-TPC-8390 is available as a complete touch panel computer product using either TS-4700 or TS-4800 Computer-on-Module. Prices start at $99 at quantity 100. [...] (+)

      Features:

    • TS-4710 Computer-on-Module
      The TS-4710 is a low profile, credit card sized TS-SOCKET Computer-on-Module which features a Marvell ARM9 PXA166 800MHz, or optionally a PXA168 1066MHz. The TS-4710 features a software programmable Lattice XP2 8K LUT FPGA which by default implements several of our controllers such as our high speed SD interface, XUARTs, and SPI controller, and more. With 2 SD card sockets this board is able to utilize our DoubleStore technology which makes the system extremely reliable. External devices can connect to the TS-4710 using Ethernet, USB host, I2C, SPI, UARTs, or GPIO. We also provide an external 16-bit bus that can be implemented over 21 DIO pins. TS-SOCKET Computer-on-Module Standard TS-SOCKET is an embedded computer standard that defines both a form factor and a connection pin-out and is based on two 100-pin low-profile connectors, allowing secure connection between a Computer-on-Module and a carrier board. TS-SOCKET Computer-on-Module feature CPU, RAM, NAND Flash, SD Card socket, Ethernet MAC/PHY and requires a single 5 V power source. Peripherals can include USB host and device, I2C, CAN, GPIO, external bus, video, touchscreen, audio, SPI, and UART. All parts are soldered-on and no moving parts are used, ensuring embedded ruggedness and reliability. TS-SOCKET Specs 75 mm x 55 mm (credit card sized) Dual 100-pin connectors Secure connection with mounting holes Common pin-out interface Low profile with 6 mm spacing A TS-SOCKET carrier board can be any piece of hardware, supplied by the customer or Technologic Systems, that interfaces with a Computer-on-Module through the dual TS-SOCKET standard connectors. JUMP-START YOUR EMBEDDED SYSTEM DESIGN The TS-SOCKET Computer-on-Modules securely connect to your custom carrier board, enabling drastically reduced design time and complexity. Start your embedded system design around one of our TS-SOCKET Computer-on-Modules to reduce your overall project risk and accelerate time-to-market. FEATURES: TS-4710 Features Up to 1066MHz CPU with 512MB RAM User-Programmable 8K LUT FPGA Boots Linux in under a second Robust DoubleStore Flash storage LCD video output to WUXGA USB2, Ethernet, PCIE, SPI, 6 UARTS Touch Panels available TS-SOCKET BENEFITS Simplifies custom embedded systems Rapid design process gets products to market faster Several COTS carrier boards for evaluation and development Design your own carrier board or use our design services Computer-on-Module are interchangeable for future upgrades Other TS-SOCKET CPUs TS-4200: Atmel ARM9 with super low power TS-4600: 450MHz at extremely low cost + 2x Ethernet TS-4712: like TS-4710 + 2x Ethernet TS-4800: FreeScale iMX515 with video and 800MHz CPU PRICE AND AVAILABILITY Computer-on-Modules are available now. Several COTS development carrier boards are also available. TS-TPC-8390 is available as a complete touch panel computer product using either TS-4700 or TS-4800 Computer-on-Module. Prices start at $99 at quantity 100. [...] (+)

      Features:

    • TS-7400 SoM
      A small embedded computer module (System-on-Module) designed to provide extreme performance for applications that demand high reliability, fast bootup/start (+)

      Features:

      32101.jpg
      • 200 MHz ARM9 processor with MMU
      • Boots Linux from NAND flash in 1.1 seconds
      • Small size - 2.9" x 4.7"
  • TE Connectivity  (1)
    • 0.5mm Free Height Connector
      Aa two-piece connector system designed for parallel board-to-board stacking applications (+)

      Features:

      45160.jpg
      • The contact system is identical to our popular 0.6 mm FH product
      • The 0.5 mm FH product has been chosen by the PICMG COM Express working group as the interface between embedded modules and carrier cards
      • Applications: Parallel board-to-board for stacking applications that require high density
  • Toradex  (15 of 18)
    • Intel Atom Z510 S - Robin Z510 S
      Connectivity and Storage Robin Z510 provides various possibilities for storing data. A Solid State Drive (SSD) and a MicroSD card slot are provided on the module itself. A SATA and SDIO interface are available on the COM Express™ connector. A 30 pin FFC connector features an additional SDIO channel for SD cards, MMC cards, WLAN adaptors, Bluetooth adaptors, modems, IrDA adapters, RFID readers or GPS modules FEATURES: High Performance - Low Power Consumption Robin Z510 S is an embedded Nano COM Express™ computer on module designed for high performance computing with low power consumption. The Robin Z510 S is based on the Intel® Atom™ Z510 ('Silverthorne') microprocessor, running at 1.1GHz, and the Intel® System Controller Hub US15W and features 512MB DDR2 RAM. This module is compatible with the nano COM Express and nanoETXExpress® form factor. [...] (+)

      Features:

    • Intel Atom Z530 M - Robin Z530 M
      Connectivity and Storage Robin Z530 offers a single PCI Express x1 lane, GLAN, HDA and up to 7 High Speed USB ports for fast signal connectivity. One USB port can be configured as USB client. In standard configuration, it features dual independent graphical outputs with VGA and LVDS. Robin Z530 provides various possibilities for storing data. A Solid State Drive (SSD) and a MicroSD card slot are provided on the module itself. A SATA and SDIO interface are available on the COM Express™ connector. A 30 pin FFC connector features an additional SDIO channel for SD cards, MMC cards, WLAN adaptors, Bluetooth adaptors, modems, IrDA adapters, RFID readers or GPS modules. FEATURES: High Performance - Low Power Consumption Robin Z530 M is an embedded Nano COM Express™ computer on module designed for high performance computing with low power consumption. The Robin Z530 M is based on the Intel® Atom™ Z530 processor, running at 1.6GHz, and the Intel® System Controller Hub US15W and features 512MB DDR2 RAM. [...] (+)

      Features:

    • Intel/Marvell Xscale PXA270 Computer on Module - Colibri PXA270
      Colibri modules provide glueless connectivity to passive and active LCDs with resolutions of up to 1024x768, as well as 4-wire resistive touch screens. An integrated 16 bit stereo codec allows playing and recording of audio. Colibris can directly connect to a CMOS camera sensor. In addition Colibris offer 100 MBit Ethernet as well as USB host and USB device connectivity. FEATURES: Computer Module based on Marvell/Intel XScale® PXA270M The Colibri PXA270 is a widely used SODIMM sized computer module based on the Intel/Marvell XScale® ARM® PXA270M processor. Colibri PXA270 modules run at 312MHz or 520MHz, and consume less than 800mW. The processor's power consumption is optimized using Intel Wireless Speedstep® Technology. Colibri modules feature state of the art technology, aiming at low power systems that require high CPU performance. They also provide all the interfaces needed in a modern embedded device. Besides the internal Flash memory, there are plenty of interfaces available for data storage: USB-MemoryStick, CompactFlash/PCMCIA and SDCard. [...] (+)

      Features:

    • Intel/Marvell Xscale PXA320 Computer on Module - Colibri PXA320
      Colibri modules provide glueless connectivity to passive and active LCDs with resolutions of up to 1024x768, as well as 4 and 5-wire resistive touch screens. An integrated 16 bit stereo codec allows to play and record audio. Colibris can directly connect to a CMOS camera sensor. In addition Colibris offer 100 MBit Ethernet as well as USB host and USB device functionality. FEATURES: Colibri PXA320 is an SODIMM sized computer module which is part of the Colibri product family. Colibri PXA320 is based on the Marvell ARM® XScale® PXA320 (Monahans) processor and runs at 806MHz. The processor's power consumption is optimized using the Intel Wireless Speedstep® Technology. Colibri modules feature state of the art technology, aiming at low power systems that require high CPU performance. They also provide all the interfaces needed in a modern embedded device. Besides the internal Flash memory, there are plenty of interfaces available for data storage: USB-Memory Stick, Compact Flash / PCMCIA and SD Card. [...] (+)

      Features:

    • Intel/Marvell Xscale PXA310 Computer on Module - Colibri PXA310
      Colibri modules provide glueless connectivity to passive and active LCDs with resolutions of up to 1024x768. Colibris can directly connect to a CMOS camera sensor. In addition, Colibris offer 100 MBit Ethernet as well as USB host and USB device functionality. FEATURES: Colibri PXA310 is a SODIMM sized computer module which is part of the Colibri product family. The product targets cost sensitive applications where connectivity and standard operating systems are essential. Colibri PXA310 is based on the Marvell XScale® PXA310 (Monahans) processor and runs at 624MHz. It features hardware video encoding and decoding and offers an interesting operating temperature range from -20 to +85 degrees Celsius. The processor's power consumption is optimized using the Intel Wireless Speedstep® Technology. Colibri modules feature state of the art technology, aiming at low power systems that require high CPU performance. They also provide all the interfaces needed in a modern embedded device. Besides the internal Flash memory, there additional interfaces available for data storage: USB-Memory Stick and SD Card. [...] (+)

      Features:

    • NVIDIA Tegra 3 Computer on Module - Colibri T30
      Supreme Graphics Performance for Demanding Applications The module targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment System, POS, Data Acquisition, Thin Clients, Robotics, Gaming and much more It offers a wide range of interfaces from simple GPIOs, industry standard I2C and SPI buses through to high speed USB 2.0 interfaces and a high speed memory bus. The HDMI interface makes it very easy to connect large, full HD resolution displays. Easy Performance Upgrade Existing customers will benefit from an extremely easy migration path from the current Colibri PXAxxx or Colibri T20 module range to the Colibri T30 – all Colibri modules are electrically pin compatible. New customers will also appreciate the ability to select the Colibri module most suitable for their application to achieve the optimum price/performance balance without the need to support different carrier board designs. FEATURES: Powered by NVIDIA: Tegra 3 Quad Core Processor The Colibri T30 is a SODIMM sized computer module based on the NVIDIA© Tegra 3 embedded system-on-a-chip. The Cortex A9 quad core CPU peaks at 1.4 GHz. The module delivers very high CPU and graphic performance with minimum power consumption. The Colibri T30 incorporates DVFS (Dynamic Voltage and Frequency Switching) and Thermal Throttling which enables the system to continuously adjust operation frequency and voltage in response to changes in workload and temperature to get the best performance with the lowest power. The integrated NVIDIA Graphics enables visually rich, smooth and fast user interfaces. [...] (+)

      Features:

    • Intel/Marvell Xscale PXA300 Computer on Module - Colibri PXA300
      Colibri modules provide glueless connectivity to passive and active LCDs with resolutions of up to 1024x768. Colibris can directly connect to a CMOS camera sensor. In addition Colibris offer 100 MBit Ethernet as well as USB host and USB device functionality. FEATURES: Colibri PXA300 208MHz (XT) is an ultra low cost SODIMM sized computer module which is part of the comprehensive Colibri product family. It is based on the Marvell/Intel ARM® XScale®PXA300 (Monahans) embedded microcomputer and runs at 208MHz. The product targets cost sensitive applications where connectivity and standard operating systems are essential. The PXA300 processor's power consumption is optimized using the Intel Wireless Speedstep® Technology. Colibri modules feature state of the art technology, aiming at low power systems that require high CPU performance. They also provide all the interfaces needed in a modern embedded device. There are two versions available, the Colibri PXA300 208MHz and an extended version, the Colibri PXA300 208MHz XT. In addition to all of the features of Colibri PXA300 208MHz, the XT version offers audio, touch, and analog-input functionality and is qualified for extended temperatures ranging from -25°C to +85°C. Besides the internal Flash memory, there additional interfaces available for data storage: USB-Memory Stick and SD Card. [...] (+)

      Features:

    • NVIDIA Tegra 2 Computer on Module - Colibri T20
      The Colibri T20 module provides dual display support and a wide variety of display interface options, including digital RGB, analogue VGA, DVI (TDMS), and with an appropriate external encoder, LVDS, making interfacing to almost any LCD panel simple. The digital RGB interface supports resolutions of up to WSXGA+ (1680x1050), while the DVI interface will support Full HD (1920x1080) resolution. 4 and 5-wire resistive touch screens are natively supported. An integrated 16 bit stereo codec provides audio recording and playback functionality. The module can also be directly connected to a CMOS camera sensor for imaging application support. In addition to this rich set of features, the Colibri T20 provides full 100 Megabit Ethernet connectivity as well as high-speed USB 2.0 host and device functionality. The Colibri T20 IT module is a special version which meets the stringent requirement of an industrial temperature range (-40 to +85 degree Celsius). FEATURES: The Colibri T20 is part of the Colibri (ARM based) product family. The T20 module is based on NVIDIA's Tegra 2 ARM Cortex A9 MPCORE Dual Core processor, runs at 1.0GHz and was the first computer-on-module to feature this processor within the embedded market. Colibri modules feature state of the art technology, and are aimed at low power systems that require high CPU performance. They are equipped with all the interfaces needed in a modern embedded device. The T20 is available with 256 MB or 512 MB of on-board Flash memory. This provides a large amount of storage for program and data, with data storage further expandable through USB and SD Card. [...] (+)

      Features:

    • Customized Single Board Computer
      An Open Source “Viola�, a new concept for ultra-low cost Customized Single Board Computers Toradex introduces Viola, a new open source concept for ultra-low cost customized single-board computers. When combined with Colibri VF50 COM, a Freescale® Vybrid™-based Computer-on-Module, a Viola based single-board computer starts at a price € 39 for 1K units (€ 49 for single unit price) and offers a very interesting set of functions for numerous embedded applications. Viola carrier board can also be combined with any other pin-compatible modules from the Colibri ARM family to offer variety of Customized SBCs. FEATURES: SBCs are off-the-shelf products that can be used to develop end-products or applications for a variety of industries. SBCs come along with integrated software and hardware, which includes SoC, memory, power requirements and real world multimedia and connectivity interfaces such as USB, UART, CAN, HDMI, Ethernet, SDIO, MMC, Analog Audio, display etc. The SBC approach helps system developers to focus on the application specific parts. An extensive range of SBCs based on variety of microprocessor, memory size, supported interfaces and operating system such as Windows Embedded Compact, Linux, Android etc are available in the embedded market. This offers flexibility to the users to choose the appropriate SBC based on their cost, features and performance requirements. Low cost SBCs are widely used in academic research projects and in feature specific end-products. [...] (+)

      Features:

    • Freescale i.MX 6 Computer on Module - Apalis iMX6
      Based on the valuable input of our customers and our engineers‘ in-depth industry expertise, Apalis brings to market many new technologies. Direct Breakout™ considerably simplifies routing of high speed signals on the baseboard. MXM SnapLock™ provides a unique connector mechanism for module fixation. Apalis also comes with support for ready-made passive cooling solutions for the most demanding applications. The module comes with a pre-installed operating system including a Windows Embedded Compact 2013 NR Runtime License. The available operating system is Linux. Windows Embedded Compact 7 and 2013 will follow later this year. FEATURES: The Apalis iMX6 is the second product in the new Apalis module family by Toradex. Complementing the existing Colibri module family, Apalis comes with a wide range of new and exciting features, ensuring customers can develop the most advanced, robust products with minimum overhead and risk. Apalis supports a huge variety of industry standard interfaces, while at the same time providing advanced multimedia and high speed connectivity making it suitable for an almost unlimited number of applications. [...] (+)

      Features:

    • Woodpecker Z510
      Woodpecker Z510 is a low cost embedded Micro COM Express computer module based on the Intel Atom Z510 (1.1 GHz, 512K Cache, 400 MHz FSB) processor and the Intel System Controller Hub US15W (+)

      Features:

      40465.jpg
      • Memory: SODIMM socket for DDR2 memory module with up to 2 GB
      • PCI Express Express Card support
      • 1000 Mbit LAN
    • Daisy Pico-ITX
      Embedded base board for credit card sized nanoETXexpress and COM Express computer modules (+)

      Features:

      43876.jpg
      • The Daisy is 75 percent smaller than a mini iTX board
      • Multimedia: VGA; TV Out; 7.1 HD AUDIO; LVDS
      • Storage: MicroSD 4 bit; SATA
    • Colibri Vybrid VF50 & VF61
      Colibri VF50 and VF61 are the latest additions to the standardized and industry proven Colibri product family. Powered by Freescale Vybrid embedded SoC, the VF61, for example, features a Cortex-A5 processor running at 500MHz, alongside with a Cortex-M4 processor clocked at 167MHz. This unique heterogeneous dual-core system enables you to implement a stunning user experience while running hard real-time and safety critical software on the M4 core. With its small form factor, the Colibri Vybrid VF50 and VF61 are world's most cost effective computer modules and hence, the ideal platform to upgrade any typical microcontroller system to the requirements of the emerging Internet of Things. http://www.toradex.com/products/colibri-arm-computer-modules FEATURES: World's most Cost-Effective Computer Module Asymmetric ARM Multicore Processing System 2x CAN, Analog In/Out, Camera Input, USB 2.0, Ethernet, UART, LCD, PWM, GPIOs Windows Embedded Compact and Embedded Linux BSP provided Industrial Temperature option available (-40 to +85 °C ) Pin compatible with Colibri Product Family Long Term availability until 2028 [...] (+)

      Features:

    • Colibri Vybrid VF50 & VF61
      Colibri VF50 and VF61 are the latest additions to the standardized and industry proven Colibri product family. Powered by Freescale Vybrid embedded SoC, the VF61, for example, features a Cortex-A5 processor running at 500MHz, alongside with a Cortex-M4 processor clocked at 167MHz. This unique heterogeneous dual-core system enables you to implement a stunning user experience while running hard real-time and safety critical software on the M4 core. With its small form factor, the Colibri Vybrid VF50 and VF61 are world's most cost effective computer modules and hence, the ideal platform to upgrade any typical microcontroller system to the requirements of the emerging Internet of Things. FEATURES: World's most Cost-Effective Computer Module Asymmetric ARM Multicore Processing System 2x CAN, Analog In/Out, Camera Input, USB 2.0, Ethernet, UART, LCD, PWM, GPIOs Windows Embedded Compact and Embedded Linux BSP provided Industrial Temperature option available (-40 to +85 °C ) Pin compatible with Colibri Product Family Long Term availability until 2028 [...] (+)

      Features:

    • Apalis T30 ARM Computer Module
      The Apalis T30 with NVIDIA© Tegra© 3 is the first product in the new Apalis computer module family by Toradex. Apalis comes with a wide range of new and exciting features to ensure customers can develop the most advanced, robust products with minimum risk and overhead. Apalis supports a variety of industry standard interfaces, while at the same time providing advanced multimedia and high-speed connectivity making it suitable for an almost unlimited number of applications. Apalis brings to market various new technologies. Direct Breakout™ considerably simplifies routing of high speed signals on the carrier board. The module also comes with support for ready-made passive cooling solutions and industrial temperature support for the most demanding applications. Apalis T30 comes with pre-installed operating system and includes a Windows Embedded Compact Runtime License. The available operating systems are Android, Embedded Linux as well as Windows Embedded Compact 7/2013. http://www.toradex.com/products/apalis-arm-computer-modules/apalis-t30 FEATURES: • Optimized for multicore applications • GbE, PCIe, SATA and USB 2.0 high-speed interfaces • Direct Breakout™ for simple carrier board design • 82 x 45 mm small form factor • Fully compatible product family • Free Support directly from Developers [...] (+)

      Features:

  • TRS-STAR  (1)
    • CXC-MPC8544
      Computer-On-Module (COM), based on Freescale Semiconductor's energy-saving Power Architecture, features high communication performance and a wide range of modern interfaces (+)

      Features:

      37212.jpg
      • Two internal 10/100/1000 BASE-TX Ethernet channels, by means of which fast LAN connections can be immediately established
      • Complies with features of the PICMG defined COM Express signal specification
      • Low power dissipation of less than 10 W